Scope mounts have been in use for over a century and there are many different types of them. The first scope mounts were made by the French in the 1800s. They were called étriers de moulins (moulin horses). These mounts were used to attach rifles to horseback and allowed for a better view of the target. The early Scope Mounts Company was founded in Russellville, Arkansas in 1924. The company made scopes that could be attached to rifles using metal straps and then extended out from the rifle's barrel using clamps. This type of mount was known as an "extension" or "scope mount." In 1938, the Scope Mount Company changed its name to Weaver-O-Matic Corporation and began producing scope mounts that could be screwed onto rifles using three screws instead of metal straps. These mounts were also known as "weaver mounts." Weaver-O-Matic Corporation went bankrupt in 1961, but their legacy will live on through their products which are still common today. Weaver-O-Matic Corporation produced some of the most popular scopeMounts ever created such as our 4x42mm Weavermount, 4x32mm Weavermount, 2x25mm Weavermount, 3x16MM Weavermount, and our 6x50mm Weavermount!
Scope mounts are essential for those who want to shoot their firearms with accuracy and without having to adjust their firearm barrel often. A scope mount is a device that attaches directly to the barrel and allows you to view your target at a high magnification. Scope mounts come in different shapes and sizes, so it is important to choose one that will fit your specific firearm. There are several factors you need to consider when choosing a scope mount: the type of rifle or shotgun you plan on using it with, the size of your rifle or shotgun, and how often you will be adjusting your firearm. When choosing a scope mount, it is important to make sure that the mount will snugly fit onto your rifle or shotguns barrel. Some mounts have adjustable screws that allow you to fine-tune the fit. Other mounts require some force (such as an elastic band) in order for it to secure firmly onto the barrel. It is also important not use any types of materials other than metal ( such as plastic) on your firearm barrel while attempting to attach a scope mount because this can damage the finish of your weapon. Once you have chosen a suitablescope mount, there are several things you must do in order for it to function properly: Unscrew the sight base from its mounting bracket Reattach sight base if removed before installation Check alignment of optics by aligning both eyes of lens against bore axis; adjust as needed If using bipods use screwdriver/hex key adjustment method remove hex head from bipod post & reattach using new hex head screws After installation ensure all parts lines up flush against each other & tighten down torque wrench handle
Russellville is a city in Pulaski County, Arkansas, United States. The population was 7,878 at the 2010 census. It is part of the Little Rock–Springdale Metropolitan Statistical Area. The first documented settler in what would become Russellville was William Hinton in 1836. A post office called "Hinton" was established in 1838, and remained operational until it closed in 1902. Russellville was platted on December 1, 1881 by J.W. Beavers under the name of "Belmont". The town named for General George Armstrong Custer had been proposed by him and others during his visit to Arkansas that same year; however, no action was taken on the proposal until after he had died. In 1907, James Maney opened a small grocery store in what would become Russellville's downtown area; it remained open until 1954. In 1916, Harry Byrd became governor of Arkansas and discovered interested parties were working to develop an oil field near Russellville; he issued a proclamation ordering all information on the project to be withheld from developers until further notice; this order survives as one of the earliest examples of government interference with commercial development within Arkansas. In 1927, Gertrude Vanderbilt Whitney purchased land east of town along Pearl River for her new estate known as Bel Air; construction began on Bel Air's main house - which still stands today - only two years later in 1929. One significant event that occurred during those early days of Bel Air's development was when Hollywood stars such as talking heads Bob Hope and Universal Pictures owner Lew Wasserman stopped by the estate for tea while they were filming "A Tree Grows In Brooklyn".
Russellville is a small town in Pulaski County, Arkansas, United States. The population was 1,353 at the 2010 census. It is part of the Little Rock–North Little Rock–Aldine, AR Metropolitan Statistical Area. The community was founded by white settlers in 1881 and named for General James K. Russell, an American general who fought in Mexico and against Native Americans. The community grew quickly because it was located on the railway line connecting North Little Rock to Fort Smith and other towns in southern Arkansas. In 1925, Russellville became the first municipal seat of Pulaski County when it was merged with White County. Russellville's economy is based on its location as a hub for transportation and commerce within Pulaski County as well as its status as a bedroom community for nearby cities such as North Little Rock and West Little Rock. The community also has a large agricultural sector that produces corn, soybeans, cotton, eggs, milk products, potatoes and hay.
Scope mounts have been around for over a hundred years, and have seen many different incarnations. The first scope mount was designed to attach to the barrel of a rifle, utilizing a lug on the back of the firearm to connect to the receiver. This type of mount was often used by Riflemen during World War I in order to increase accuracy and range. In the early 1920s, another design was developed that utilized Scope Rings instead of lug connections between firearm and receiver. These rings could be rotated in order to adjust magnification or remove your camera from your shooting position. This type of mount became popular among Shotgun shooters because it allowed them more flexibility when using multiple shotshells at close range. The 1930s saw an influx of new firearms into circulation, and as a result, scope mounts began becoming less common. One reason for this may have been the increased popularity of shotguns as rifles became more prevalent in society. In addition, some shooters had become comfortable with using bipods or other types of legs when shooting handguns at distances beyond 200 yards. As a result, scope mounts no longer enjoyed widespread use throughout the 1940s and 1950s! However, in recent decades there has been an resurgence in interest inscope mounts due to their potential benefits. For example, they can allow shooters to place their camera closer to their target while still allowing them access to all aspects of their shooting experience without havingto remove their rifle from its mounting location. Additionally, they can help improve accuracy by providing better support for your optics while you shoot!
The original expansion mount for the Nikon D4 was a proprietary design that was only available to Nikon shooters. The mount allowed photographers to attach additional lenses, filters, and other accessories directly to the camera body. This gave photographers the ability to shoot photos with more flexibility and control than they could ever hope to achieve using traditional focusing methods. In 1990, Nikon released an updated version of the expansion mount known as the DX-mount. This new mount allowed shooters to attach any lens or accessory up to a max aperture of 14mm (5x zoom). Additionally, this version of the DX-mount featured an improved center focus drive system that made it easier for photographers to keep their images in focus even when shooting in low light conditions. In 2004, Nikon released a new version of theDX-mount known as FX-mount. This new mount offered shooters increased flexibility and power when it came to attaching lenses and accessories. It also featured a new center focus drive system that made it easier for photographers to keep their images in focus even when shooting in high ISO settings.
Russellville is a town in Pulaski County, Arkansas, United States. The population was 2,543 at the 2010 census. It is the county seat of Pulaski County. The town was first settled by Scots-Irish immigrants in 1872 and named after General James A. Russell who fought in the American Civil War. The post office was founded here in 1876. The town grew rapidly during the Depression years and reached its peak population of 5,853 in 1944 with many of the residents working at local munitions plants or as migrant laborers on farms near Russellville. However, during World War II much of the town's growth slowed as it became an all-male military community and few people left to attend war production plants nearby. In recent decades however, there has been a growing number of residents moving into Russellville due to its proximity to major metropolitan areas such as Memphis and Little Rock for work or education opportunities. Russellville is located at (36.560924,-93.439453). According to the U S Census Bureau, the city has a total area of , of which is land and (1) water supply: (2) sewerage system: (3) public parks: (4) fire department: (5) library: (6) hospital: (7) schools/university:
Russellville was founded in 1847 by John F. Russell and his wife, Eliza C. Russell. The town quickly became a center for cotton culture and the business dealings of its founders have helped to keep the community active through its centuries-long history. Today, Russellville remains a thriving community with an active economy, however, portions of the town are now home to other businesses and residents.
Looking for a way to improve your online presence? Check out our scope mounts in Russellville, Arkansas! Our products make it easy to get the perfect mounting solution for your home based business or office. With so many options available, you're sure to find the perfect mount for your needs. Contact us today to learn more about our scope mounts in Russellville, Arkansas!
Our scope mounts are the best way to ensure your rifle has a strong, secure hold on its platform. With our mounts, you can rest assured knowing that your rifle is always in the same place no matter where it is in your home or office.
← For pictures and more information, browse by category on the left or click here.
No items found. If you used the filter, try selecting less options.